Applicable models: CL4NX/6NX Plus
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
Press the button (FEED).
|
|
A media jam has occurred in the cutter.
Remove the jammed media from the cutter.
Refer to the video for loading the media, for the media path, and for the operation of each part inside the product.
|
•
|
Be careful not to cause injury with the cutter blade when removing the media.
|
|
If the error is not solved, power on the product again.
|
|
The cutter blade does not return to the specified position.
Press the button (FEED) to move the cutter blade back to the specified position.
If the error is not solved, power on the product again.
|
|