|
|
|
•
|
Open the top cover fully to prevent accidental drop of the cover.
|
|
|
2.
|
Push the head lock lever (2) towards the rear.
|
|
3.
|
Press the tab (3) on the tip of the ribbon rewind spindle to pull it out.
|
|
4.
|
Pull to remove the used ribbon from the ribbon rewind spindle.
|
|
5.
|
Push the ribbon rewind spindle (4) all the way in.
|
|
6.
|
Remove the used ribbon core from the ribbon supply spindle.
|
|
7.
|
Load the ribbon (5) onto the ribbon supply spindle (6).
|
While taking note of the winding direction, insert the ribbon all the way in.
|
8.
|
From the ribbon supply spindle (6), pass the ribbon below the print head (7).
|
|
9.
|
Wind the ribbon counterclockwise to the ribbon rewind spindle (4) and grip sheet (8).
|
Turn the ribbon rewind spindle counterclockwise for several rounds, to wind the ribbon.
|
10.
|
Press the print head down until the head lock lever is locked.
|
|
|
|
•
|
When closing the top cover, be careful not to pinch your fingers.
|
|
|
12.
|
Press the button (FEED) in Offline mode to feed the media.
|
|
13.
|
Press the button (ONLINE) to change to Online mode.
|
Comments
0 comments
Please sign in to leave a comment.