[02-00417-EN] Auto Measure – SATO Help Center

The product automatically measures the length of the media.

The measured length of the media will be automatically saved in [Label Length].

The Auto Measure function can be performed when [Sensor Type] is set to [Gap] or [I-Mark].

The setting procedure of the label length using the Auto Measure function is as follows:

1.	Load the media.

2.	Enable [Auto Measure].

3.	Press the / (Standby/Home) button to show the Home screen.

4.	Open the top cover. (Cover Open error occurs.)

5.	Close the top cover.

6.	When you press the / (Standby/Home) button again, the product feeds two pieces of label and measures the label length.

7.	The measured label length is saved in [Label Length].

•	When you enable [Auto Measure], this function executes in the following conditions:

◦	When the product changes to Online mode for the first time after being powered on

◦	When the product changes to Online mode after the top cover is opened/closed

◦	When the product changes to Online mode after the setting of [Sensor Type] is changed

•	When [Protocol] in the [Applications] menu is changed to [SZPL], [Auto Measure] is enabled and executed automatically.

Related articles