Parts Identification for the Product（ Internal View ）

Internal View

(1) USB connector (Type A)
Enable the storage of product settings information with USB memory.
Also, other devices like a barcode checker, barcode scanner or keyboard can be connected.

• Be sure to perform a virus check on the USB memory before connecting it to the product. SATO Corporation shall not be held responsible for any product malfunctions caused by a virus spread via USB memory. • Be sure to insert and remove the USB memory stick perpendicular to the connector.

• The size of the USB memory that can be connected to the side of the product is as follows: ◦ Length: under 68 mm (2.68") (excludes the metal part of the connector) ◦ Width: under 27.6 mm (1.09") ◦ Thickness: under 8.6 mm (0.34")

(2) Ribbon supply spindle
(3) Media guide
(4) Feed lock latch
Used to open the feed roller and media sensor assembly.
(5) Feed roller and media sensor assembly
(6) Feed roller (Consumables)

(7) Media sensor adjustment knob
Used to adjust the position of the media sensor.
(8) Pressure plate (Consumables)
(9) Ribbon rewind spindle
(10) Head lock lever
Used to release the print head assembly.
(11) Ribbon roller
(12) Print head (Consumables)
Creates an image directly on the media or by using a ribbon. Clean the print head regularly.
(13) Platen roller (Consumables)
(14) Pressure roller (Consumables)

02-01217-EN