[03-01262-EN] Setting Mode Menu

Select the setting mode according to the following procedure:

• Press the LINE button to change the printer to offline mode.

The printer changes to offline mode.

In the settings mode menu, the setting modes are shown as follows:

Menu	Description
Online mode	Returns to online mode.
User mode	Access the settings related to the basic user configurations.
Interface mode	Access the settings related to the interfaces.
Memory mode	Access the settings related to the memory.
Service mode	Access the settings related to the media sensor adjustment and various functions activation.
Advanced mode	Access the settings related to the advanced printer configurations.
Hex dump mode	Access and print the hex dump for troubleshooting.
RFID user mode	Access the settings related to the optional RFID module. Shows only if you have installed the optional RFID kit and enabled the RFID mode.
Information mode	Access the information of this printer.

Select the setting mode according to the following procedure:

1. Press the LINE button to change the printer to offline mode.

The printer changes to offline mode.

2. Press the ENTER

The printer changes to the setting mode menu.

3. Select the setting mode using the

/    /     /      buttons.

The selected setting mode shows on the screen and the icon is highlighted by inverting its colors.

4. Press the ENTER button to enter the selected mode.

The functions of the buttons in the setting mode menu are shown as below.