[01-00288-EN] [Auto-calibration]

Applicable models: PW208NX

Please refer to the below.

PW208NX

PW208mNX

Perform the auto-calibration for the selected media sensor.

The options are as follows:

Gap + I-Mark

Adjusts both the Gap sensor and I-mark sensor.

Gap

Adjusts the Gap sensor.

I-Mark

Adjusts the I-mark sensor.

 

•	When using PW208mNX, the Auto-Calibration is set to I-Mark. You cannot change the setting.

•	Before making adjustment, set the specified media on the sensor and close the cover. If you are using labels, remove the label from the liner. Align it so that the media sensor does not detect the I-mark (black mark).