[01-00974-EN] Manually Setting the Print Mode

Applicable models: CT4-LX

Please refer to the below.

You can change the print mode of the product according to product specification and its usage.

When [Auto-mode] is enabled, the print mode is set automatically according to the installed options.

You can manually set the print mode if you disable [Auto-mode]. The selectable print modes differ according to the installed options.

Installed option	Print mode
None	Continuous/Tear-Off
Dispenser unit	Continuous/Dispenser
Cutter unit	Continuous/Tear-Off/Cutter/Cut & Print/Partial cutter
Linerless cutter unit	Linerless cutter/Linerless tearoff

　

Change the print mode according to the following procedure:

1.	Tap [SETTINGS] on the Home screen or Offline screen.

2.	Input the password if it is enabled.

3.	Tap [Printing].

4.	Disable [Auto-mode].

5.	Tap [Print Mode].

6.	Select the print mode.

• Changing the print mode may link to and change [Sensor Type] and [Backfeed]. After changing the settings, confirm that the settings have become compatible with the media you are using. • When using RFID tags on an RFID model, do not select cutter mode with no backfeed, partial cutter mode, linerless cutter mode, or linerless tearoff mode. If these print modes are set, you cannot use RFID tags.