[02-00899-EN] Usable Media

Applicable models: PW208NX

•Use our specified supply products.

　

Type

•	Media roll (Face-out)

 

　

Size

•	Continuous

Item	PW208NX	PW208mNX
Media Length	13 to 160 mm (0.5" to 6.3")
Media Length (With Liner)	16 to 163 mm (0.6" to 6.4")
Media width	25.4 to 55 mm (1.0" to 2.2")*	55 mm (2.2")
Media Width (With Liner)	28.4 to 58 mm (1.1" to 2.3")	58 mm (2.3")

* When the Print Speed is set to 5 or 6 inch/sec, use the media of 50 mm or wider.

　

•

Tear-off

Item	PW208NX	PW208mNX
Media Length	16 to 160 mm (0.6" to 6.3")
Media Length (With Liner)	19 to 163 mm (0.7" to 6.4")
Media width	25.4 to 55 mm (1.0" to 2.2")*	55 mm (2.2")
Media Width (With Liner)	28.4 to 58 mm (1.1" to 2.3")	58 mm (2.3")

* When the Print Speed is set to 5 or 6 inch/sec, use the media of 50 mm or wider.

　

•

Dispenser

Item	PW208NX	PW208mNX
Media Length	25 to 160 mm (1.0" to 6.3")	-
Media Length (With Liner)	28 to 163 mm (1.1" to 6.4")	-
Media width	32 to 55 mm (1.3" to 2.2")	-
Media Width (With Liner)	35 to 58 mm (1.4" to 2.3")	-

　

•

Linerless

Item	PW208NX	PW208mNX
Media Length	16 to 120 mm (0.6" to 4.7")
Media width	50 to 58 mm (2.0" to 2.3")	58 mm (2.3")

• For Linerless media, you should make the proper settings of the product to match your print layout conditions. For details, contact your SATO reseller.

 

Roll Diameter

•

PW208NX

Maximum φ60 mm (φ2.4")

•

PW208mNX

Maximum φ35 mm (φ1.4")

•

Coreless

φ26.9 mm (φ1")