How to adjust when printing quality is not satisfactory

The causes frequently observed
(1) Improper loading of labels/ribbon
(2) Dirt such as adhesive or a piece of label on the label route
(3) inappropriate head pressure balance against the paper size (width).

Measure
(1) Please refer to the below link and reload the labels and the ribbon accordingly.
How to set and reload the media (paper and ink ribbon):

(2) Please clean the inside of the printer, particularly the media route.
Refer to the following videos of the individual cleaning procedures.

For Standard/Left-Hand Type

Cleaning (Head)

Cleaning (Roller)

Cleaning (Paper path)

Cleaning (Ribbon path)

For Opposite/Right-Hand Type

Cleaning (Head)

Cleaning (Roller)

Cleaning (Paper path)

Cleaning (Ribbon path)

(3) Please check the link below and set the head pressure dial appropriate for the label being used.
For Head Pressure Balance adjustment:

If the printed image quality is still not really improved, please check the points below.
Try increasing the print darkness.
Try switching labels and ribbon.
Try reducing the print speed.
For Adjusting the Print Darkness

01-01226-EN