[02-00723-EN] Usable Media

• Use our specified supply products.

　

Type

•	Media roll (Face-in wound/face-out wound)

•	Fan-fold media

 

• Some RFID tags may cause paper jams because the tags rise up during backfeed. Please check the performance of each RFID tag that you use. Be careful especially when you use the RFID tags that are less than 27 mm (1.06") long in cold environments.

　

Size

•	Continuous

Item

CL4NX Plus

CL6NX Plus

Media Length

203 dpi

6 to 2497 mm (0.24" to 98.30")

305 dpi

6 to 1497 mm (0.24" to 58.94")

609 dpi

6 to 397 mm (0.24" to 15.63")

203 dpi

6 to 2497 mm (0.24" to 98.30")

305 dpi

6 to 1497 mm (0.24" to 58.94")

Media Length (With Liner)

203 dpi

9 to 2500 mm (0.35" to 98.42")

305 dpi

9 to 1500 mm (0.35" to 59.05")

609 dpi

9 to 400 mm (0.35" to 15.75")

203 dpi

9 to 2500 mm (0.35" to 98.42")

305 dpi

9 to 1500 mm (0.35" to 59.05")

Media Width

•	22 to 128 mm (0.87" to 5.04")

•	47 to 177 mm (1.85" to 6.97")

Media Width (With Liner)

•	25 to 131 mm (0.98" to 5.16")

•	50 to 180 mm (1.97" to 7.08")

*Above pitch and width are valid for die-cut labels. For media without liner, such as tags or non die-cut labels, use the 'with liner' values.

　

•	Tear-Off/Cutter

Item

CL4NX Plus

CL6NX Plus

Media Length

203 dpi

17 to 2497 mm (0.67" to 98.30")

305 dpi

17 to 1497 mm (0.67" to 58.94")

609 dpi

17 to 397 mm (0.67" to 15.63")

203 dpi

17 to 2497 mm (0.67" to 98.30")

305 dpi

17 to 1497 mm (0.67" to 58.94")

Media Length (With Liner)

203 dpi

20 to 2500 mm (0.79" to 98.42")

305 dpi

20 to 1500 mm (0.79" to 59.05")

609 dpi

20 to 400 mm (0.79" to 15.75")

When Print Mode is set to Cut & Print, the minimum media length for each print speed is the following value.

2 ips: 40 mm (1.57")

3 ips: 58 mm (2.28")

4 ips: 75 mm (2.95")

5 ips: 93 mm (3.66")

6 ips: 110 mm (4.33")

7 ips: 125 mm (4.92")

8 ips: 140 mm (5.51")

9 ips: 156 mm (6.14")

10 ips: 171 mm (6.73")

203 dpi

20 to 2500 mm (0.79" to 98.42")

305 dpi

20 to 1500 mm (0.79" to 59.05")

When Print Mode is set to Cut & Print, the minimum media length for each print speed is the following value.

2 ips: 40 mm (1.57")

3 ips: 58 mm (2.28")

4 ips: 75 mm (2.95")

5 ips: 93 mm (3.66")

6 ips: 110 mm (4.33")

7 ips: 125 mm (4.92")

8 ips: 140 mm (5.51")

9 ips: 156 mm (6.14")

10 ips: 171 mm (6.73")

Media Width

•	22 to 128 mm (0.87" to 5.04")

•	47 to 177 mm (1.85" to 6.97")

Media Width (With Liner)

•	25 to 131 mm (0.98" to 5.16")

•	50 to 180 mm (1.97" to 7.08")

*Above pitch and width are valid for die-cut labels. For media without liner, such as tags or non die-cut labels, use the 'with liner' values.

　

•	Cutter (When installing the rotary cutter unit)

Item

CL4NX Plus

CL6NX Plus

Media Length

203 dpi

30 to 2497 mm (1.18" to 98.30")

305 dpi

30 to 1497 mm (1.18" to 58.94")

609 dpi

30 to 397 mm (1.18" to 15.63")

-

Media Length (With Liner)

203 dpi

33 to 2500 mm (1.30" to 98.42")

305 dpi

33 to 1500 mm (1.30" to 59.05")

609 dpi

33 to 400 mm (1.30" to 15.75")

-

Media Width

•	22 to 128 mm (0.87" to 5.04")

-

Media Width (With Liner)

•	25 to 131 mm (0.98" to 5.16")

-

*Above pitch and width are valid for die-cut labels. For media without liner, such as tags or non die-cut labels, use the 'with liner' values.

　

•

Dispenser

Item

CL4NX Plus

CL6NX Plus

Media Length

•	10 to 397 mm (0.39" to 15.63")

* 10 to 27 mm are available only for thermal transfer.

Media Length (With Liner)

•	13 to 400 mm (0.51" to 15.75")

* 13 to 30 mm are available only for thermal transfer.

Media Width

•	22 to 128 mm (0.87" to 5.04")

•	47 to 177 mm (1.85" to 6.97")

Media Width (With Liner)

•	25 to 131 mm (0.98" to 5.16")

•	50 to 180 mm (1.97" to 7.08")

Diameter of Liner Winding

Maximum φ120 mm (4.72")

*Above pitch and width are valid for die-cut labels. For media without liner, such as tags or non die-cut labels, use the 'with liner' values.

　

•

Linerless

Item	CL4NX Plus	CL6NX Plus
Media Length	30 to 120 mm (1.18" to 4.72")	-
Media Width	60 to 118 mm (2.36" to 4.65")	-

• The length of RFID tag needs to be more than 15.8 mm (0.62"). • The usable media sizes and print quality depends conditions such as print speed, media, media/ribbon combination, product settings and used environment. It is highly recommended to check the performance based on actual usage conditions in advance.

 

　

Roll Diameter (Media Roll)

•	(CL4NX Plus)

Maximum φ265 mm (φ10")

• This value is for when using the 3" core. If you use the 4" core, the maximum diameter is limited.

•	(CL6NX Plus)

Maximum φ220 mm (φ8.66")

•	When using a dispenser unit with liner rewinder

Maximum φ220 mm (φ8.66")

 

Core Diameter (Media Roll)

•	φ76 mm (φ3"), φ101 mm (φ4")

•	When using a dispenser unit with liner rewinder

φ76 mm (φ3")

• It is recommended to use 4" core for thick paper (more than 150 μm (0.0059")), non-adhesive media and RFID tags (RFID models only).

　

Height (Fan-fold Media)

•	Maximum 200 mm (7.87")

• The maximum value is for when the product and media are placed on tables of the same height. The height may be limited depending on where media is placed.

　

Thickness

•	60 to 268 μm (0.060 to 0.268 mm (0.0024" to 0.011"))

• The thickness of the thickest part of the RFID tag is more than 268 μm (0.268 mm (0.011")). Be sure to do tests beforehand.