[02-00878-EN] Status Icons – SATO Help Center

The icons on the screen indicate the current state of the product.

Only a limited number of icons can be displayed on the screen. Therefore, important icons have priority over the other icons.

Normal view

Enlarged icon view

(1) Status icon

(2) Enlarged icon

Current state of the product

Status Icons	Description
	The product is in stopped state. (Offline)
	The product is receiving data.
	The product is printing. (Online)
	The product has stopped printing. (Offline)
	The product is waiting for dispenser. This icon only appears if you have selected the [Dispense Mode] (PW208NX only) or the [Linerless] operation mode.
	HEX dump mode is enabled. This icon only appears if you have selected [Enabled] in the HEX dump mode.

Interface Information

Status Icons	Enlarged Icons	Description
	-	This icon appears when the USB port is in use.
		Bluetooth is available but not connected.
		Bluetooth is available and connected.
		Wi-Fi is available but not connected. This menu only appears if the product supports wireless LAN.
		Wi-Fi is connected. Signal level: 1 This menu only appears if the product supports wireless LAN.
		Wi-Fi is connected. Signal level: 2 This menu only appears if the product supports wireless LAN.
		Wi-Fi is connected. Signal level: 3 This menu only appears if the product supports wireless LAN.
		Wi-Fi is connected. Signal level: 4 This menu only appears if the product supports wireless LAN.
	-	This icon appears when Wi-Fi Direct is enabled. This menu only appears if the product supports wireless LAN.
	-	This icon appears when a USB memory is connected.
	-	NFC is available.
	-	NFC is disabled.
	-	SOS is enabled.

-: Enlarged icon is not displayed.

Battery Information

Eco Charge disabled		Eco Charge enabled		Description
Status Icons	Enlarged Icons	Status Icons	Enlarged Icons	Description
				The remaining battery level is displayed. When the Eco Charge function is set to [Disabled], different information is displayed depending on the battery level. The remaining battery level is also displayed in a numeric value (%) on the left side of the icon.
				The battery is being charged using the AC adapter. When the Eco Charge function is set to [Disabled], different information is displayed depending on the battery level. The remaining battery level is also displayed in a numeric value (%) on the left side of the icon.
				The battery cannot be charged due to the internal temperature of the product being too high or too low.
				Please replace the battery if or is displayed.

Warning display

Icon	Description
	A receive buffer near full warning was detected. The receive buffer is almost full. Please wait until the icon disappears.
	A command error was detected. The print data may be incorrect. Please check the print data.
	There is a broken element in the print head. A head error may be displayed depending on the print layout.
	IP address could not be acquired. Reconfigure your network connection and settings, and restart the product once the network settings are displayed correctly.
	Authentication with iOS has been aborted. Wait until the icon disappears (approx. 130 sec.) and then re-authenticate with iOS. Do not power off the product or remove the battery while the authentication with iOS is in progress.
	Bluetooth connection with iOS cannot be established due to failure of the authentication chip. Please contact the SATO technical support.
	The product information could not be sent to the SOS.

Notifications

Icon	Description
	The product is due for cleaning.
	The print head or platen roller is due for replacement.

Related articles