The product adjusts the print position precisely by detecting I-marks or gaps on the media (label) using media sensors.
The I-marks or gaps on each type of media are as follows:
Set the sensor type to detect the print position according to the media to be used.
Set the sensor type according to the following procedure:
1.
|
Press the button in Online mode.
|
The product changes to Offline mode.
2.
|
Press the button.
|
The product changes to Settings mode.
3.
|
Select [Printing] using the / buttons.
|
4.
|
Press the button.
|
5.
|
Select [Sensor Type] using the / buttons.
|
6.
|
Press the button.
|
The
[Sensor Type] screen appears.
7.
|
Select the sensor type to detect the print position using the / buttons.
|
Disables the media sensor.
Select when using gap type media. Use the transmissive type sensor.
Select when using I-mark type media. Use the reflective type sensor.
|
•
|
If you have selected [Tear-Off], [Dispenser], or [Cut & Print] in the [Print Mode] menu, only [Gap] and [I-Mark] will be available.
|
•
|
If you have selected [Linerless] in the [Print Mode] menu ( CL4NX Plus only), only [None] and [I-Mark] will be available.
|
|
8.
|
Press the button to confirm.
|
-
Comments
0 comments
Please sign in to leave a comment.