Category of problem

       Click below tab and printer to see more details.  

Operation Hardware Setting Driver/Tool

PW208NX

• [01-00227-EN] Error Message 1001 (Machine Error)
• [01-00288-EN] [Auto-calibration]
• [01-00107-EN] Incorrect Print and Stop Position
• [01-00102-EN] Cleaning the Product
• [01-00282-EN] Error Message 1008 (Out of Paper)
• [01-00821-EN] When an Error Message Appears
• [01-00109-EN] Want to Improve the Print Quality
• [01-00281-EN] Error Message 1007 (Cover Open)
• [01-00105-EN] Cannot Communicate nor Output
• [01-00103-EN] When You Are in Trouble

CT4-LX

• [01-00093-EN] How to deal with error message 1035 (I-mark not found) error
• [01-00091-EN] How to solve an error message 1008 (Out of Paper)
• [01-00077-EN] Troubleshooting(When Using the Product)
• [01-00089-EN] How to solve an error message 1028 (Gap not found)
• [01-00080-EN] When an Error Message Appears
• [01-00081-EN] Sensor Auto-Calibration is failed
• [01-00090-EN] How to cancel a print job during printing at printer side.
• [01-00095-EN] How to solve an error message 1017
• [01-00082-EN] Cannot Communicate nor Output
• [01-00083-EN] Problems with display

FX3-LX

• [01-00069-EN] How to cancel a print job during printing at printer side.
• [01-00056-EN] When an Error Message Appears
• [01-00054-EN] Sensor Auto-Calibration is failed
• [01-00579-EN] Error Message 1015 (Cutter Error)
• [01-00057-EN] Cannot Communicate nor Output
• [01-00073-EN] How to solve an error message 1028 (Gap not found)
• [01-00053-EN] Cleaning the Product
• [01-00058-EN] Problems with display
• [01-00074-EN] How to adjust when the print position is not right

CL4NX /CL6NX

• [01-00037-EN] How to solve an error message 1008 (Out of Paper)
• [01-00025-EN] Troubleshooting(When Using the Product)
• [01-00026-EN] Cleaning the Product
• [01-00041-EN] How to solve an error message 1028 (Gap not found)
• [01-00028-EN] Want to Improve the Print Quality
• [01-00034-EN] When an Error Message Appears
• [01-00036-EN] How to cancel a print job during printing at printer side.
• [01-00051-EN] How to adjust when printing quality is not satisfactory
• [01-00048-EN] How to adjust when a ribbon wrinkle happens after replacing a ribbon.

CL4NX Plus/CL6NX Plus

• [01-00015-EN] How to solve an error message 1028 (Gap not found)
• [01-00009-EN] When an Error Message Appears
• [01-00004-EN] Troubleshooting(When Using the Product)
• [01-00001-EN] How to improve a paper jam
• [01-00016-EN] How to solve an error 1007 (Head open error)
• [01-00017-EN] Sensor Auto-Calibration is failed
• [01-00020-EN] How to solve an error message 1008 (Out of Paper)
• [01-00002-EN] Error Message 1015 (Cutter Error)
• [01-00021-EN] Print quality issue (vertical white line or partially not printed)
• [01-00018-EN] Explanation of the icons displayed on the screen

S84-ex/S86-ex

• [01-01257-EN] Loading the Ribbon
• [01-01258-EN] Loading Label with Dispenser
• [01-01260-EN] Loading Media without Using Dispenser
• [01-01256-EN] Loading the Media

S84NX/S86NX

• [01-01244-EN] When an Error Message Appears
• [01-01243-EN] Troubleshooting(When Using the Product)
• [01-01251-EN] Replacing the Print Head
• [01-01227-EN]Print quality issue (vertical white line or partially not printed)
• [01-01219-EN] Want to Improve The Print Quality
• [01-01250-EN] Cleaning the Product
• [01-01230-EN] How to solve an error 1007 (Head open error)
• [01-01240-EN] How to solve an error message 1028 (Gap not found)
• [01-01220-EN] Loading the Media
• [01-01241-EN] How to solve an error message 1008 (Out of Paper)
• [01-01242-EN] When You Are in Trouble
• [01-01235-EN] Problems with display

PW208NX

• [02-00162-EN] Searching from an Image of the Product
• [02-00165-EN] Specifications
• [02-00168-EN] Settings Mode
• [02-00166-EN] Items Displayed in each Display Mode
• [02-00163-EN] Platen Roller Replacement Timing
• [02-00169-EN] Part Identification
• [02-00164-EN] Adjusting the Product

CT4-LX

• [02-00141-EN] Searching from an Image of the Product
• [02-00144-EN] Status Icon
• [02-00143-EN] Specifications
• [02-00150-EN] How to check a Printhead resolution (dpi)
• [01-01006-EN] IParts Identification (Internal View)
• [02-00142-EN] Replacing Consumable Parts
• [02-00148-EN]Adjusting the Product
• [02-00149-EN] How to adjust a vertical printing position.
• [01-01004-EN] Parts Identification (Front View)
• [01-01005-EN] Parts Identification (Rear View)

FX3-LX

• [02-00161-EN] How to adjust media stop position and media cut position
• [02-00155-EN] Replacing Consumable Parts
• [02-00156-EN] Specifications
• [02-00153-EN] Adjusting the Product
• [02-00154-EN] Searching from an Image of the Product
• [02-00160-EN] Display and Operation of the Operator Panel
• [02-00156-EN] Specifications
• [02-00153-EN] Adjusting the Product
• [2-00565-EN] Usable Media
• [01-00557-EN] Parts Identification ( Front View)

CL4NX /CL6NX

• [02-00138-EN] How to check a Printhead resolution (dpi)
• Yellow exclamation mark on the display
• [02-00128-EN] Replacing the Print Head
• How to adjust when label stop position is not correct
• [02-00125-EN] Searching from an Image of the Product
• [02-00124-EN] Adjusting the Product
• [02-00129-EN] Usable Media and Ribbon
• [02-00130-EN] Specifications
• [02-00127-EN] Replacing the Platen Roller
• [02-00132-EN] Parts Identification for the Product(Internal View)
• [02-00139-EN] How to respond to the Replace Print Head icon

CL4NX Plus/CL6NX Plus

• [02-00123-EN] How to adjust when label stop position is not right
• [02-00118-EN] Adjusting the Product
• [02-00112-EN] Parts Identification for the Product（ Internal View ）
• [02-00723-EN] Usable Media
• [02-00115-EN] Searching from an Image of the Product
• [02-00120-EN] Specifications
• [01-00010-EN] Replacing the Print Head
• [02-00122-EN] How to check a Printhead resolution (dpi)
• [02-00117-EN] Replacing the Platen Roller
• [02-00121-EN] Parts Identification for the Operator Panel
• [02-00119-EN] Usable Media and Ribbon
• [02-00113-EN] Parts Identification for the Product（Rear View）
• [02-00114-EN] Parts Identification for the Product（Front View）

S84-ex/S86-ex

• [02-01259-EN] Test Print Mode
• [02-00172-EN] I-Mark Sensor Manual Calibration Procedure
• S84/86-ex GAP Sensor Manual Calibration Procedure
• [02-00170-EN] Factory Mode/Counter information
• [02-01273-EN] Interface Settings
• [02-01272-EN] Interface Mode
• S84ex/86ex - Rotating the Operator Display Panel
• [02-01253-EN] Parts Identification for the Product（Internal View）
• [02-01274-EN] Interface Combination
• [02-01271-EN] Interface Specifications
• [02-01269-EN] Connecting the Interface Cable
• [02-01270-EN] Interface Connections
• [02-01255-EN] Parts Identification for the Product（Rear View）
• [02-01254-EN] Parts Identification for the Product（Front View）

S84NX/S86NX

• [02-01245-EN] Specifications
• [02-01247-EN] Usable Media and Ribbon
• [02-01215-EN] Parts Identification for the Operator Panel
• [02-01217-EN] Parts Identification for the Product（ Internal View ）
• [02-01234-EN] How to adjust when dispenser stop position is not right
• [04-01248-EN] Want to Install a Printer Driver
• [02-01216-EN] Parts Identification for the Product（ Front View ）
• [02-01232-EN] Incorrect Print Position
• [02-01246-EN] How to check a Printhead resolution (dpi)
• [02-01252-EN] Replacing the Platen Roller
• [02-01218-EN] Parts Identification for the Product（Rear View）

PW208NX

• [03-00204-EN] Before You Start
• [03-00206-EN] Settings Mode Menu
• [03-00205-EN] Getting Started

CT4-LX

• [03-00199-EN] Initial Setup (Startup Guide)
• [03-00200-EN] Various Settings of the Product
• [03-00201-EN] How to change the operation sound ( buzzer volume )

FX3-LX

• [03-00202-EN] Initial Setup ( Startup Guide )
• [03-00203-EN] The [ Settings ] Menu

CL4NX /CL6NX

• [03-00187-EN] Settings Mode Menus
• [03-00188-EN] Before You Start
  
• [03-00189-EN] Initial Setup ( Startup Guide )
• [03-00197-EN] CLNX - Customizing the CLNX Splash Screens
• [03-00198-EN] How to change the Print Mode

CL4NX Plus/CL6NX Plus

• [03-00177-EN] Settings Mode Menus
• [03-00178-EN] The Product's [Tools] Menu
• [03-00179-EN] Before You Start
• [03-00180-EN] Want to set up a Printer
• [03-00181-EN] Initial Setup (Startup Guide)
• [03-00182-EN] The Product's [System] Menu
• [03-00183-EN] The Product's [ Applications ] Menu
• [03-00184-EN] The Product's [ Interface ] Menu
• [03-00185-EN] The Product's [Printing] Menu
• [03-00186-EN] How to change the Print Mode

S84-ex/S86-ex

• [03-01262-EN] Setting Mode Menu
• [03-01261-EN] Setting Mode Menu and Icons
• [03-01263-EN] Before You Start
• [03-01264-EN] Features of the Product
• [03-01267-EN] Regulatory Approval
• [03-01266-EN] Precautions for Installation and Handling
• [03-01268-EN] Copyrights
• [03-01265-EN] Safety Precautions

S84NX/S86NX

• [03-01223-EN] Settings Mode Menus
• [03-01249-EN] Adjusting the Product
• [04-01237-EN] Want to set up a Printer
• [03-01222-EN] Settings Mode Menus
• [03-01213-EN] Before You Start

PW208NX

• [04-00218-EN] An Error Occurs When Installing the Printer Driver
• [03-00886-EN] Procedure for Connecting the Product to a Computer
• [04-00219-EN] Installing the Printer Driver

CT4-LX

• [04-00213-EN] Connecting the Product to a Computer
• [01-01002-EN] An Error Occurs When Installing the Printer Driver

FX3-LX

• [04-00215-EN] Connecting the Product to a Computer
• [04-00216-EN] An Error Occurs When Installing the Printer Driver

CL4NX /CL6NX

• [04-00210-EN] Connecting the Product to a Computer
• [04-00211-EN] Want to Install a Printer Driver
• [04-00212-EN] An Error Occurs When Installing the Printer Driver

CL4NX Plus/CL6NX Plus

• [04-00207-EN] Connecting the Product to a Computer
• [04-00208-EN] Want to Install a Printer Driver
• [04-00209-EN] An Error Occurs When Installing the Printer Driver

S84NX/S86NX

• [04-01224-EN] Connecting the Product to a Computer
• [04-01238-EN] An Error Occurs When Installing the Printer Driver

SOS (SATO Online Services)

• [09-00916-EN] Access daily checkup QR code on SOS-enabled printers
• [09-00220-EN] "SOS!" icon is showing on a screen
• Access daily checkup QR code on SOS-enabled printers

LP 100R

• [11-01168-EN] What does remote management allow or do?
• [11-01169-EN] What are the USB ports used for on the SATO LP 100R?
• [11-01170-EN] Can I print using USB media to print files?
• [11-01171-EN] What are the USB ports used for on the SATO LP 100R?
• [11-01178-EN] Should I upgrade from the V3 to the LP100R Windows V4 PCL driver?
• [11-01182-EN] Why do I have strange characters and voids in my PCL output?
• [11-01183-EN] What is the advantage of the SATO LP 100R Windows V4 PCL driver?
• [11-01184-EN] How do I send an emulation file to the LP 100R from Windows?
• [11-01185-EN] How does the SATO LP 100R Windows V4 PCL driver differ from the V3?
• [11-01186-EN] Can I print to an LP 100R from Windows servers or work stations?

If you cannot find the Model listed in above that you are using, please submit a request from Here.